Weapons cleaning and maintenance kits
Buy gun cleaning kits: cleaning sticks, brushes and oils
To extend the life of your firearm and preserve its original appearance, it is necessary to carry out regular and correct maintenance. A gun without a minimum of maintenance will end up rusty, jammed and will stop working or lose its original finishes. Along with your firearm, it is necessary to purchase a kit of basic cleaning and maintenance products.
Airsoft guns, airsoft guns and hunting guns do not all function in the same way, but what they do have in common is that they all need a minimum of maintenance. For this, there is a wide range of gun maintenance products that help to ensure proper functioning and a long service life. Undoubtedly, a small investment in maintenance and prevention will avoid costly repairs in the future.
We would also like to emphasise that good cleaning and maintenance requires the purchase of quality, specialised products for firearms. Only with good quality products can a good cleaning and a long service life be guaranteed.
What are sticks and how to choose them
Cleaning sticks for air rifles, shotguns and pistols are a metal object that is used to be inserted down the barrel of the gun for cleaning or unjamming. The sets of cleaning sticks usually include different types of tips or brushes to clean or unclog the barrels of the guns.
When choosing a ramrod, you need to check the overall length (especially if your gun barrel is very long), the strength of the metal cylinder and, above all, that they are the same calibre as your gun. Some sets or maintenance kits may include heads of different calibres.
Cleaning and maintenance of a BB gun
Depending on the type of BB guns, minimal maintenance will be necessary. At the very least, you should:
On air rifles: airguns need to be cleaned periodically, especially after use when they are going to be stored and unused for a long time. Lead residues can lead to rust on your BB gun. In addition, it will be necessary to lubricate the hinged parts of the gun with general gun lubricating oil. Additionally, for rubber parts with friction or pressure (e.g. gaskets on PCP air rifles) it would be recommended to use silicone oil. In the case of wooden stocks, in this category there are specific treatments to keep them as good as the first day. Storage is just as important as cleaning and lubrication. It is important to store the guns in dry and humidity-free places, and it is recommended to store them unloaded and in a case or box.
Air pistols: Maintenance is similar to that of air rifles. It consists of cleaning the gun frequently, especially after use, and lubricating the moving parts with gun oil. In the case of CO2 cylinder guns, it is recommended to lubricate the valve frequently with silicone oil or pellgunoil, to prevent it from drying out and creating micro-cracks that cause air leaks. In the case of these guns, the main reason why they break down is not removing the CO2 cylinder after use and leaving them charged for long periods of time. For this reason, to avoid damage to the valve it is highly recommended to remove the canister after use and not to leave the gun loaded.
Airsoft cleaning and maintenance
As with BB guns, airsoft pistols and airsoft rifles need to be made:
Periodic cleaning: removing any residue the gun has picked up from the range, ammunition residue, etc.
Lubrication: it is necessary to lubricate the moving metal parts of the gun that are subject to friction, known as ‘joints’. In the case of CO2 airsoft guns, it is necessary to remove the canister after use and lubricate the valve with silicone oil (as with BB guns). In the case of GAS airsoft guns, it is not necessary to lubricate the inside of the gun as the green gas itself contains specific oils for this maintenance.






















